Description
A MODE 3 (IEC61851-1) FAST EV CHARGER FOR RESIDENTIAL USE
EVmax smart EV charger has an IP55 patented design case for outdoor and indoor use.
The type 2 plug shutter makes highly flexible and compatible with all electric vehicles.
Find us- Zhejiang Benyi Electrical in KfW Funding Wallbox Charging Station List
TYPE 2 CHARGING SOCKET WITH SHUTTER
Charging socket type 2 with shutter is based on the proven charging socket type 2 with an additional shutter module, with additional protection against contact of electrical parts.
Dynamic Load Balancing Function
To safely balance the energy usage between your electric car chargers and other home appliances to make your car chargers in the most efficient way.
DLB (Dynamic Load Balancing) is available in the EVmax BCP series AC EV Charger for home use, when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.
PEN FAULT DETECTION
Monitors the electrical system and in the event of a fault automatically disconnects all poles including the earth conductor.
If the user uses an EV charger equipped with PEN protection, its internal design has a contactor to cut off the ground, once the PEN line is cut off, the contactor KM1 and KM2 are immediately and automatically disconnected, there is only a weak leakage current between CP and PE to L line, its current value is less than 1mA, which is the smallest perceived leakage current of the human body, people can disengage themselves, no safety risks.
SMART APP FOR OPTION
EVmax EV chargers can be controlled by a smart APP via WIFI or Bluetooth connection:
✔ One to one binding EV charger by resetting the password, prevent the EV charger being stolen;
✔ View charging data and status;
✔ Set up various charging configurations, charging current, DLB mode, etc.
✔ Scheduled charging;
✔ Firmware update;
FEATURES/ADVANTAGES
RFID card to charge automatically
Type 2 (IEC 62196-2) plug socket without cable
Built-in Type B RCD for Leakage Protection
Over Temperature Sensor
Clip-on Grid Current Sensor
LED Ring Status Indication
With Emergency Stop Switch
SPECIFICATION
Electrical | |
Charging capacity | 1.3kW-7.4kW / 4.1kW-22kW |
Charge mode | Mode 3 (IEC 61851-1) |
Output power | Selectable 1-phase or 3-phase, 230-400V
6 A to 32 A, 50-60 Hz |
Connector options | Fixed cable type 2 plug or type 2 Socket |
Fixed cable length | 6m (18 ft) |
Cable Entry | Rear or bottom |
Protection and certification | |
Build-in RCD | TYPE A + DC6mA leakage sensor built-in |
With Cable | IP65, IK07 |
Socket | IP55, IK07 |
Housing fire ratings | V0 |
Operating temperature | -25 – +55℃ |
Compliance | IEC61851-1, IEC61851-21-2,
IEC61000-4 CE EMC EU/2014 CE Low Voltage EU/2014/35 |
Certificate | CE, CB, RCM |
Connectivity | |
Authorization | Auto-start standard / RFID card option |
Status indication | LED ring |
Charging protocol | OCPP 1.6J optional |
WLAN communication | Wi-Fi / Bluetooth 4.2 option |
Mechanical | |
Housing | Polycarbonate |
Dimension | W169 x H380 x D151 mm |
Mounting | Wall or Pole |